Rollshutters

Talius Rollshutters – An Introduction

A rollshutter is a rolling door, window or opening cover that consists of many horizontal slats connected and guided by a rail system. Rollshutters are useful for security and vandalism protection, storm protection, sun protection and increasing energy efficiency. They can be used in residential, commercial, and institution applications. Rollshutters can be used in interior or exterior applications and are custom made to harmonize with each building.

Talius rollshutters are made from high-quality aluminum making them lightweight but durable. Talius offers 6 different profile options and 4 stock colors. Talius also offers custom painting with over 1800 available options ensuring the rollshutters match your project. Talius offers manual or motorized operation with a variety of control options. Talius rollshutters are available with a variety of security features ensuring you can find the right product to suit your needs.

Rollshutter Maximum Dimensions

The rollshutter unit must satisfy width, height and area maximum limitations. If the rollshutter unit consists of more than one curtain section, the limitations apply to each curtain section individually. Depending on the operator device selected, the maximum dimensions of the curtain section may be further reduced due to operator lifting capacity limitations.

Please note that the maximum area is not the product of maximum width and maximum height. 

*Exceptions

The preceding limits are only valid in the most favorable conditions. The limitations are automatically reduced if the rollshutter is:

• Exposed to high winds
• Free standing, such as rolling doors or patio/under deck enclosures
• Used for security applications

Mounting Options: Width Dimensions (“A”)

Face-of-Wall Installation

Use the generic face-of-wall mount diagram below to assist in determining your width dimensions. Regardless of which type of guide rails you select, provide the critical width dimension for each application; either the (A1) dimension if the guide rail must not encroach on the opening, or the (A2) dimension if the overall width of the rollshutter unit must fit between an obstruction.

Between Jamb Installation

Use the generic jamb mount diagram below to assist in determining your width dimensions. When mounting a rollshutter unit between window jambs or between posts (jamb mount), the critical dimension required is the overall rollshutter unit width (A2), which is typically equal to, or slightly less than, the opening width of the structure. You can mount most guide rails through the curtain channel and into the mounting structure as shown below, however, for greater stability and generally easier installation, you could order the optional “L” Build-up for mounting the guide rails to the installation.

Mounting Options: Height Dimensions (“B”)

Face-of-Wall Installation

For rollshutters mounted face-of-wall over a window or similar opening, ensure that the guide rail height (B1) extends slightly below the opening, and a minimum of 2″ (50mm) above the opening, or the opening window sash.  An optional “L” sill may be added below the guide rails, or an optional “U” sill may be added between the guide rails. If you are adding the “U” sill below the guide rails, add 1 7/8” to the B dimension to allow the rollshutter to rest below the clear opening. Refer to the chart on the next page to determine the required minimum clearance above the top of the guide rails for the appropriate panel box.

Below-Header Installation

When mounting tight below a header, or other obstruction, the critical height dimension is the overall unit height (B2). With this mounting method, the clear opening height clearance which remains is equal to the overall unit height (B2) less the height of the appropriate panel box plus 2″ (50mm) for the curtain’s bottom profile. Refer to the chart on the next page to determine the appropriate panel box size. In the generic diagram shown below, the vertical mounting structure posts have been omitted for clarity.

Rollshutter Panel Boxes

Talius rollshutters roll up into a two part, 5 corner housing called a “panel box”. Depending on the size of the rollshutter, these boxes range from 5” (125mm) to 12” (300mm).

Clearance for Panel Box

Ensure sufficient room above the guide rails for the rollshutter panel box using the sizes provided on the table below for each curtain profile type.

NOTE:

• Panel box sizes may vary depending on the required shaft
• Hanger locks may change size of panel box required for a rollshutter
• These heights are B1’s (guide rail height). Please ensure you have taken into account the 2″ upset for bottom profile clearance and/or the 1 7/8″ downset for u-sill if required.
• 

Panel box size conversion for above table:

125 = 5″      150 = 5 7/8″       165 = 6 1/2″      180 = 7″           205 = 8″      230 = 9″               254 = 10″           300 = 12″

This chart is intended to be a reference guide only. If you have panel box room limitations at site, please contact us with your project details for an accurate size at 1-800-665-5550.

Rollshutter Rail Options

Talius has various rail options for rollshutters chosen based on the application and what curtain profile is being used on the project.

For general applications where security is not a concern, Talius recommends the PRO series rail. These rails are a one-part rail system that are generally used for interior applications or residential projects where the rollshutter is being used for solar protection.

For increased security, Talius recommends the SAFE series rail. The safe rail is a two-part rail that actively hides the fasteners from the outside once the installation process is complete. The cap prevents tampering with the fasteners once installed, increasing the security of the shutter.

For rollshutters that are wider than 6’ or need increased security or wind load protection, Talius recommends the PRO-40 and SAFE-40 rails. These rails come with a wider channel which increases the amount of penetration into the rail channel by the curtain profiles. This decreases the chance that the curtain may be forced out of the rail system by a persistent burglar or high winds. The PRO and SAFE series rails are available for the HQ Macro, SHIELD Mini and SAFE Mini profiles.

For all rollshutters with a SHIELD Standard curtain the SV-75 rail is used. For SAFE View rollshutters with a guide rail height of up to 67” the SV-66 rail is used and for applications where the guide rail exceeds 67” the SV-75 rail is used. 

Rollshutter Guide Rails

PRO Includes ¼” (6.5mm) build-up For curtain widths under 6’ (1.83m) on general exterior applications, and for widths under 10’ (3.05) on general interior applications. For applications requiring increased security or wind protection select the PRO-40 or SAFE-40 guide rails
SAFE Includes ¼” (6.5mm) build-up For curtain widths under 6’ (1.83m) on general exterior applications, and for widths under 10’ (3.05) on general interior applications. For applications requiring increased security or wind protection select the PRO-40 or SAFE-40 guide rails
PRO-40 Includes ¼” (6.5mm) build-up For increased wind load protection. Should generally be chosen when curtain widths exceed 6’ (1.83m) on exterior applications, and for widths over 10’ (3.05m) on interior applications.
SAFE-40 Includes ¼” (6.5mm) build-up For increased security and wind load protection. Should generally be chosen when curtain widths exceed 6’ (1.83m) on exterior applications, and for widths over 10’ (3.05m) on interior applications.
SV-66 For use with SAFE View rollshutters with a B1 (guide rail height) of up to 67” ONLY.
SV-75 For use with all SHIELD Standard rollshutters. For use with SAFE View rollshutters with a B1 (guide rail height) of over 67”.

Rollshutter Curtain Options – An Overview

HQ Macro: A light duty, rollformed aluminum profile with an insulated core and tough enamel finish. Typically used in residential applications for shading, privacy, cold and heat protection, and noise reduction. Typically used in commercial applications for privacy on relatively narrow spaces where security is not needed.

SHIELD Mini: A medium-duty, rollformed aluminum profile with a hard foam core, improved dent resistance, and very durable polyurethane/polymide top coat. Typically used in residential applications for shading, privacy, cold and heat protection, noise reduction, and vandalism protection. Typically used in commercial applications for counter enclosures, cabinets and storage areas for privacy, visual appearance, vandalism protection.

SAFE Mini: A heavy-duty, rollformed aluminum profile with super-hard resin core and tough enamel finish. Typically used in residential and commercial applications for high wind and storm protection and interior and exterior high security applications.

SHIELD Standard: A larger, more robust rollformed aluminum profile with hard foam core and tough enamel finish. Typically used in residential and commercial projects for medium to high security applications including large window and door protection, garage doors, counter enclosures, storage areas, and for rolling door applications.

SAFE View: An extruded aluminum profile with two profile types available – grille and perforated. Typically used in commercial applications when both high security and visibility or light-transmittance are needed.

HQ Macro

A light duty, rollformed aluminum profile with an insulated core and tough enamel finish.

Typical Applications and Solutions:

• Residential applications for shading, privacy, cold and heat protection, and noise reduction
• Commercial applications for closing off counter pass-thru areas with relatively narrow openings for privacy and/or visual appearance, and where security is not a major objective.

Specifications

Size Limitations

Note: You must comply with all three maximums. Do not exceed any one of them. Maximums are automatically reduced if the rollshutter is exposed to high winds, must satisfy stringent security requirements or is freestanding, such as in the case of a patio enclosure.

Standard Colours

Panel Box Limitations

Heights shown are guide rail heights (B1). Ensure sufficient room above the guide rails for the rollshutter panel box. In addition, the curtain’s bottom profile protrudes approximately 2″ (50mm) below the bottom of the panel box when the curtain is fully rolled up. Therefore, measure the rollshutter purposely high enough to clear any opening window or door parts, or tops of counter enclosures.

Wind Load Information

The graph below shows blow-out wind speed for unprotected, free standing rollshutter curtains. Where rollshutters cover windows and doors you may expect considerably better performance due to the protection offered by the overall wall surface.

Testing was done at the curtain heights stated in the graph. Performance of the actual rollshutter will improve slightly if the application is lower in height than the tested unit. Conversely, performance will decrease slightly if your actual rollshutter is taller than the tested unit.

SHIELD Mini

A medium duty, rollformed aluminum profile with a hard foam core, improved dent resistance, and very durable polyurethane/polymide top coat.

Typical Applications and Solutions

• Wide variety of residential applications for shading, privacy, cold and heat protection, noise reduction, and vandalism protection.
• Wide variety of commercial applications including over windows and doors, and for closing off counter pass-thru areas, cabinets and storage areas for privacy and/or visual appearance, and for vandalism protection.
• Choose SHIELD Mini when the curtain covers a rather wide, yet relatively low opening and when moderate security is desired.

Specifications

Size Limitations

 Note: You must comply with all three maximums. Do not exceed any one of them. Maximums are automatically reduced if the rollshutter is exposed to high winds, must satisfy stringent security requirements or is freestanding, such as in the case of a patio enclosure.

Standard Colours

Panel Box Limitations

Note: This chart is intended to be a reference guide only. Panel box sizes may vary depending on the required shaft size and hanger lock presence. If you have headroom limitations on your project please contact us at 1-800-665-5550.Heights shown are guide rail heights (B1). Ensure sufficient room above the guide rails for the rollshutter panel box. In addition, the curtain’s bottom profile protrudes approximately 2″ (50mm) below the bottom of the panel box when the curtain is fully rolled up. Therefore, measure the rollshutter purposely high enough to clear any opening window or door parts, or tops of counter enclosures.

Wind Load Information

The graph below shows blow-out wind speed for unprotected, free standing rollshutter curtains. Where rollshutters cover windows and doors you may expect considerably better performance due to the protection offered by the overall wall surface.

Testing was done at the curtain heights stated in the graph. Performance of the actual rollshutter will improve slightly if the application is lower in height than the tested unit. Conversely, performance will decrease slightly if your actual rollshutter is taller than the tested unit.

SAFE Mini

A heavy-duty, rollformed aluminum profile with a super-hard resin core and tough enamel finish.

Typical Applications and Solutions

• Residential and Commercial window and door applications for high wind, storm and hurricane protection. Also provides excellent protection against cold and heat.
• Commercial and residential high-security applications including window and door protection, security for counter enclosures, storage areas and tobacco, liquor, computer, electronics or medical filing cabinets.

Specifications

Size Limitations

Note: You must comply with all three maximums. Do not exceed any one of them. Maximums are automatically reduced if the rollshutter is exposed to high winds, must satisfy stringent security requirements or is freestanding, such as in the case of a patio enclosure.

Standard Colours

Panel Box Limitations

 Heights shown are guide rail heights (B1). Ensure sufficient room above the guide rails for the rollshutter panel box. In addition, the curtain’s bottom profile protrudes approximately 2″ (50mm) below the bottom of the panel box when the curtain is fully rolled up. Therefore, measure the rollshutter purposely high enough to clear any opening window or door parts, or tops of counter enclosures.

Note: This chart is intended to be a reference guide only. Panel box sizes may vary depending on the required shaft size and hanger lock presence. If you have headroom limitations on your project please contact us at 1-800-665-5550.

Wind Load Information

The graph below shows blow-out wind speed for unprotected, free standing rollshutter curtains. Where rollshutters cover windows and doors you may expect considerably better performance due to the protection offered by the overall wall surface.

Testing was done at the curtain heights stated in the graph. Performance of the actual rollshutter will improve slightly if the application is lower in height than the tested unit. Conversely, performance will decrease slightly if your actual rollshutter is taller than the tested unit.

SHIELD Standard

A heavy-duty, roll-formed aluminum profile with a hard foam core and tough enamel finish.

Typical Applications and Solutions

• Residential and commercial medium to high-security applications including window and door protection, garage doors, security for counter enclosures and storage areas, and for rolling door applications.

Specifications

Size Limitations

Note: You must comply with all three maximums. Do not exceed any one of them. Maximums are automatically reduced if the rollshutter is exposed to high winds, must satisfy stringent security requirements or is freestanding, such as in the case of a patio enclosure

Panel Box Limitations

 Heights shown are guide rail heights (B1). Ensure sufficient room above the guide rails for the rollshutter panel box. In addition, the curtain’s bottom profile protrudes approximately 2″ (50mm) below the bottom of the panel box when the curtain is fully rolled up. Therefore, measure the rollshutter purposely high enough to clear any opening window or door parts, or tops of counter enclosures.

Note: This chart is intended to be a reference guide only. Panel box sizes may vary depending on the required shaft size and hanger lock presence. If you have headroom limitations on your project please contact us at 1-800-665-5550.

Wind Load Information

The graph below shows blow-out wind speed for unprotected, free standing rollshutter curtains. Where rollshutters cover windows and doors you may expect considerably better performance due to the protection offered by the overall wall surface.

Testing was done at the curtain heights stated in the graph. Performance of the actual rollshutter will improve slightly if the application is lower in height than the tested unit. Conversely, performance will decrease slightly if your actual rollshutter is taller than the tested unit.

SAFE View Rollshutters are available with your choice of extruded aluminum grille or perforated profiles, allowing for security as well as light transmission, ventilation, and visibility. SAFE View Grille 56 rollshutters offer 42% light transmission and SAFE View Perforated 56 rollshutters offer 29% light transmission. Solid and secure, environmentally friendly and lightweight aluminum grilles and perforated slats are more resistant to corrosion, rain and fluctuations in temperature compared to steel product solutions.

SAFE View

Typical Applications and Solutions

• Stylish appearance harmoniously suits any building architecture, storefronts, small shops, counter enclosures and the interior of modern shopping centers.
• Perfect for shop front windows to allow for 24-hour visibility.

Specifications

*Note: SAFE View available in silver only 

Size Limitations

The SAFE View Grille 56 and SAFE View Perforated 56 have an additional profile called a “Reinforcement Bar”. The reinforcement bar can be added in different combinations to both Grille and Perforated curtains to allow for larger curtain areas. Please see combination options below:

Multiple Section Rollshutters

Available for HQ Macro, SHIELD Mini and SAFE Mini

A multiple section rollshutter has a single panel box and multiple curtain sections for the purpose of esthetics or cost effectiveness. A split has multiple curtain sections with either a centre rail, two back to back rails or two back to back rails with a space in between. Multiple sections on the rollshutter can be operated with one or more operators.

Notes About Splitting Rollshutters

In almost all cases where a rollshutter has one or more splits, and is controlled by a single operator, the horizontal level of the bottom profile may be out by approximately 1/4″ (6mm) to 3/8” (9mm) between the first bottom profile and the last when the curtains are fully rolled up. This is a natural occurrence which does not affect the performance of the product and is purely as aesthetic issue.

Maximum Dimensions

HQ Macro, SHIELD Mini and SAFE Mini have a maximum overall panel box width of 230” (5.8m). For approximate maximum section widths and heights, please refer to the individual profile pages. SHIELD Standard and SAFE View rollshutters are available as single span units only.

Rollshutter Paint Options

Talius offers 4 standard rollshutter colors of white, brown, beige and silver and over 1800 custom color options.

Talius Release Anti-Graffiti Coating

Talius offers the option of an anti-graffiti coating on all rollshutters. This is a cross-linked polyurethane coating designed for maximum surface protection designed to allow for easy clean up of graffiti from exposed rollshutter surfaces. Talius Anti-Graffiti Coating is a clear coat that provides a gloss finish over stock and custom colors and offers a non-stick surface, allowing you to wipe away graffiti. Some advantages of Anti-Graffiti Coating are:

• Repels dirt and graffiti spray
• Saves money and reduces clean up costs
• Preserves your image
• Protects from a wide range of substrates

With outstanding resistance to chemicals and excellent color-retention, Talius Anti-Graffiti Coatings highly abrasion-resistant surface make it an ideal choice for rollshutters used in public areas and schools.

Talius Release Anti-Graffiti coating is a modified aliphatic-polyurethane coating with enhanced abrasion resistance to provide resistance to chemicals, abrasions and impact. Talius Release is a clear coat that provides a gloss finish over stock and custom colors, and offers color retention and a non-stick surface. Talius Release coating is applied with a dry film thickness of 1.0 –2.0 mils (25-50 microns). Hardness: ASTM D3363, 2H. Solvent Resistance: ASTM D4752, 100 MEK rubs; NO failure. Abrasion Resistance: 1000 cycles CS-17, ASTM D4060, 32 mg loss. Impact Resistance: ASTM D2794, 40 in lbs; NO failure. Flexibility: ASTM D522, 1/8” mandrel blend; NO failure.

Talius Custom Paint Options

Talius has over 1800 options for custom colours available to customers. These options are available through a Benjamin Moore paint fan or by custom colour matching. Talius custom paints each product in our state of the art manufacturing facility using a two component pure polyurethane paint system which utilizes aliphatic isocyanate reacted with resin polyols. This paint is the same as those commonly applied in demanding conditions such as commercial air crafts, chemical plants, oil and gas platforms and commercial ships like ferries or navy ships. There will be a miniscule change in the gloss and colour level over the first 5 years. Over the first 15 years a colour change between 1-4 McAdam units can be expected, where 1 is not perceptible to the human eye. The top coat will continue to preform chemical, corrosion and abrasion services under normal conditions solidly throughout the products lifetime.

Rollshutter Locking Options

Rollshutter Storm Bars

Storm bars are strong aluminum extrusions mounted temporarily by the customer in front and/or behind the rollshutter curtain. Their purpose is to provide additional strength against curtain blow outs by strong winds. Customers typically clip a storm bar in place when a storm warning is issued or when a rollshutter in an area with high wind speeds is left unoccupied over a period of time.

The design of storm bars allow for easy and fast clip-in action at the top and bottom. Rollshutters are able to operate while storm bars are in place. A rollshutter equipped with a storm bar in the curtain centre typically experiences an increase in the blow out wind speed limit in excess of 50%.

Rollshutters that have no barrier behind them, such as a window or door, required a storm bar on both sides of the curtain. This is to protect against blowouts in both directions due to positive and negative wind forces. In these cases, one such pair of storm bars accounts only for the increase in wind load protection of a single storm bar.

Storm Bar

Cross Bar

Storm Bar Mounting Location Examples:

The following is an example of a typical mounting location for most applications. You may order one or more storm bars for Position A. For Position A locations, the factory will base the default storm bar height on the height of the guide rails, unless you specify otherwise. Note that the cross bar will be mounted tight against the folded lip of the panel box removable access lid, providing the proper clearance between the storm bar and the face of the curtain.

Below are two examples of alternate mounting locations. You may order one or more storm bars for Position “B” only, or for Positions “A” and “B”. For Position “B” locations, you must specify the opening height where the storm bar is to be located. Mounting plates will be provided for Position “B” storm bars, and must be positioned on site so that the clearance between the storm bar and the face of the curtain is between 3/8″ – 1/2″ (10 – 12mm).

Rollshutter Build-Up and Sills

Talius has build-up that comes in our 4 standard colors with the ability for custom painting to help with the ease of installation. Talius build-up and PRO and SAFE guide rail series slide together ensuring a snug and secure fit.

Talius Sills

Talius rollshutters must close down onto a sill. When a natural sill is not present at the site the L-shaped sill OR the SAFE U-sill can be utilized. If increased security is required Talius recommends the SAFE U-sill. This is a channel sill that the rollshutter rolls down into. This unique sill prevents the insertion of tools that could pry-up the rollshutter.

Talius Build-Up

Talius build up comes in three different options, 3/8” (9.5mm), 7/8” (22mm) and L-Build Up. Talius recommends utilizing these build-up options on existing sites where rollshutters are being added and the opening is not level or sites where door handles or other obstructions need to be cleared. Talius build-up easily fits onto the PRO and SAFE series rails and other build up, allowing you to use them in combination. See below for common locations and diagrams of build-up for your project.

Rollshutter Manual Operator Options

Manual Operator

Talius offers manually operated rollshutters with tape operators, torsion springs and manual gear with crank. The most common manually operated option is gear with crank. All manually operated rollshutters have limitations that depend on the size and weight of the rollshutter curtain. Please contact Talius at 1-800-665-5550 with your project details if you require a manual operator.

Tape Operator

Tape operators are chosen most often for small and medium residential rollshutters or counter enclosures up to 24kg (53lbs) where the public has no access to the operator. Tape operators are amongst the most cost-efficient operators however they are quite limited as they can only operate rollshutters with a light curtain weight. Tape operators offer low security as the box or tape may easily be tampered with. Talius offers both small and large tape operators, chosen based on the size of the unit.

Torsion Spring

Torsion spring operators are installed inside the shaft, pre-loaded to provide tension in the upward direction. To keep the rollshutter in a closed position there is a manual slide lock or key lock on the bottom profile. Torsion spring operators are most often used commercially in counter enclosures, cabinets with cigarette or liquor storage, or entrance doors that are the last place of entry for the building.

Gear with Crank Rod

Manual gear with crank operated rollshutters have multiple mounting options as seen below. Cranks can come as a removable unit with a bell connector or attached to the wall or panel box. Standard crank rod lengths are 68” in the extended position however custom lengths are available.

Manual with gear rollshutters can be operated from the panel box side of the rollshutter or out the back of the panel box. The universal that controls the gear can then go through the wall with the bell connector mounted on the inside of the wall. This application is often used when the rollshutter is mounted on top of a window and the customer would like operation inside of the building or on counter enclosures when the rollshutter is mounted face of wall of the exterior wall.

Manual Override Option

Talius offers manual override motors for rollshutters. These motors have a gear system that allows operation of the rollshutter if the power access has been cut or the motor is broken. These crank rods come with an attached universal that is fed into the gear system allowing the user to crank the rollshutter open or closed. These motors are often used on rollshutters that cover main entrance doors ensure access to the building in the event of a power outage. Please note that manual operation of a manual override motor should only be used if there is no power to the motor. Utilizing this function when the motor has power can damage the motor.

Rollshutter Motorized Operator Options

Motorized Operators – An Overview

Talius offers two main motor options for Rollshutters, Standard Limit Motors and Somfy RTS Motors. Both motor types are available in a variety of torque capacities to operate any size of Rollshutter.

Standard Limit Motors

High quality Standard Limit tubular motors are designed for reliable, long lasting, maintenance-free operation. These motors are hard-wired, with hard-wired switches, and feature mechanical limits. The standard limit motor can be operated with the flip of a switch or the push of a button. Choose from a variety of controls including:  single switches for individual operation such as Decora Paddle Switches or Keyswitches, or add relays to allow for group control of multiple Talius products from one master location.

Standard Features: 

• 110v/60 Hz
• UL/ULC certified
• Thermal overload switch
• 6’ Motor cable

Somfy RTS Motors

Somfy Radio Technology (RTS) products provide flexible, convenient options. Somfy RTS motors feature built-in radio frequency receivers and electronic limit switches for simple programming.  The motors can be operated via hand-held transmitter(s), wireless wall switches, timers, or even from the convenience of a. When combined with the appropriate interface, this motor will integrate with a fire alarm, or building automation system.

Standard Features: 

• 110 v/60 Hz
• UL/ULC certified
• Thermal overload switch
• Interim stop position
• Standard 6’ cable, 12’, 18’, and 24’ cable options are available

Note: Both Standard Limit Motors and Somfy RTS Motors have manual override motor options

Motor Preparation Package

Utilize this package with a manual operator if there is concern that the customer may find it difficult to operate the manual Rollshutter in future years, or if the customer simply does not wish to spend the additional cost for a motorized operator at this time but may want to motorize in the future. With this package, during manufacturing process all the necessary components are installed, except the motor and switch, for motorized operation. This makes it less time consuming and expensive for future conversion to a motorized operator.

Switches for Standard Limit Motors

If you have selected your rollshutter with standard limit motorized operation, you’ll need to select an appropriate switching device for your motor. Numerous options exist from simple switches and key switches, to Group Control, Timers, and Remote Control. The following pages contain typical switching components that you may select from. For more special switching requirements, such as sun and wind sensors or home automated controls, please contact Inside Sales for additional switching solutions that may be available for your application.

Important Electrical Notes

A certified electrician should perform all wiring connections for motors and switching devices. Follow the approved wiring information provided for each motor and switching device, and do not deviate without approval from the manufacturer. DO NOT wire more than one Standard Limit Tubular Motor to a single switch without the use of special switching devices available through the manufacturer. Only switching controls for tubular motors approved by the manufacturer can be used on our rollshutters to prevent voiding the warranty, possible damage to your product and home, or personal injury. Contact the manufacturer for additional information or clarification on any electrical component.

Standard Limit Motor Switches

Standard limit motors are easily operated with the flip of a switch or the push of a button. Choose from a variety of controls including:

• Single switches for individual operation.
• Group controls for operating multiple Talius products from one location.
• Timer switches for convenient, automated opening and closing.

What is the difference between Maintained and Momentary Switches?

Maintained switches are three-position switches featuring an up, down and stop position. Maintained switches are designed to allow the user to operate the switch in the direction of their choice (up or down) and the switch will operate the rollshutter continuously until it has hit its upper or lower limit unless otherwise interrupted in the stop position.

NOTE: Maintained switches allow the operator to let go of the switch and allow the motor to keep running until it reaches its upper or lower limit. 

Momentary switches are three-position switches featuring an up, down, and stop position. Momentary switches are designed to allow the user full control of the operation of the rollshutter by having to keep contact with the switch in the direction of their choice (up or down) and the ability to stop the operation by releasing their hold on the switch.

Momentary switches are ideal for areas in which safety of small children or animals is a concern, or where the operator needs to monitor the operation of the rollshutter to ensure that it does not project downward on any objects that may damage the objects or the rollshutter.

Standard Limit Motor Component Options 

Standard Limit Motor Wall Switch Operators

Standard Limit Motor Controllers for Garage Door Applications

Talius recommends the following motor controllers for garage door applications. Please work with your Talius contact to check with local building code requirements to ensure that all building and safety requirements are met prior to placing your order.

Standard Limit Motor Controllers for Group Control Applications

Talius recommend the following motor controller options for group control applications, Please contact Talius if you have any questions regarding the configuration of the group control or for further information on the following options.

Switches for Somfy RTS Motors

If you have selected a rollshutter with Somfy RTS motorized operation, an appropriate switching device will need to be selected. One of the benefits of the Somfy RTS option is the ability to easily operate multiple units from a single transmitter. Talius offers transmitters that allow for the operation of up to 16 units on a single transmitter.

Somfy transmitters have a range of approximately 65’ through double reinforced concrete. However, this range can vary slightly based on factors such as interference, building construction, wiring, and location of components. If you find that you are having this issue or that you need a longer range an RTS Repeater can be used to extend the range of the signal.

The Somfy myLink^TM allows you to use your smart phone to control your Rollshutters, even when away from home. The myLink allows for full control of your Rollshutter and includes individual control, group control, remote access and a 7-day schedule.

Somfy RTS Handheld Transmitters

Lets you operate a motorized rollshutter from anywhere in or around the building. These compact hand-held transmitters are personally coded for maximum security with up, stop and down push bottoms make using them just as easy as a wall switch.

Somfy RTS Wall Switches

Somfy RTS Specialty Switches

Tips for Integrating Rollshutters with Home Automation

The popularity of home automation has been increasing greatly in recent years due to much higher affordability and simplicity through smartphone and tablet connectivity. A home automation system integrates electrical devices in a house with each other. The techniques employed in home automation include those in building automation as well as the control of domestic activities. Devices may be connected through a home network to allow control by a personal computer, and may allow remote access from the internet. Through the integration of information technologies with the home environment, systems and appliances are able to communicate in an integrated manner which results in convenience, energy efficiency, and safety benefits.

Talius Rollshutters can be integrated with a variety of home automation systems. To assist in specifying the right solution for your clients, please use the following questions as a guide. After you have obtained answers to these questions, please contact Talius with this information and let us consult you on determining the appropriate motor and interface solution for your client.

1. What is the name of the home automation system manufacturer?
2. Is there an automation contractor involved?
3. What is the application?
   1. Commercial or Residential?
   2. Windows and/or Doors?
   3. Are there concerns that the units might operate when a door, out opening casement or awning window is open?
   4. Provide a general description of what our products are being used for and the desired function
4. How many rollshutter units are involved?
5. What is the largest Rollshutter required for this project?
6. What is the control configuration?
   1. Is individual control required?
   2. Is master control required?
   3. Is sub-group control required?
7. How will the units be operated?
   1. Strictly by the building automation system, or does the customer desire additional switches or controls?
8. Are there special control considerations?
   1. Does the client want remote control?
   2. Are weather sensors requested?
   3. Are times requested?
9. Is there any resistance from the building owner or automation contractor to using a Radio Frequency system?
   1. Are there considerations with respect to radio reception, interference or range that might lead us to stick with a hard wired solution?

This is basic guideline for considerations when integrating rollshutters with a home automation system. If you have any further questions, please contact our Inside Sales team at insidesales@talius.com, or toll free at 800.665.5550.